TM 9-2320-366-34-2
13-33. M1083 SUBFRAME RAIL REPLACEMENT (CONT)
b. Installation.
WARNING
Subframe rail weighs approximately 200 lbs
(91 kgs). Attach a suitable lifting device
prior to installation. Failure to comply may
result in injury to personnel or damage to
equipment.
NOTE
• Step (1) requires the aid of two assistants.
• Left and right side subframe rails are installed
the same way. Right side shown.
(1) Position subframe rail (1) on vehicle.
CAUTION
Ensure subframe rail flange is fully in contact
with main frame rail flange. Failure to comply
may result in damage to equipment.
NOTE
Steps (2) through (9) require the aid of an
assistant.
(2) Position ten bolts (2) and self-locking nuts (3) in frame
plate (4).
(3) Tighten ten self-locking nuts (3) to 210-225 lb-ft (285-305
N·m).
13-334
