TM 9-2320-366-34-2
13-34. M1093 SUBFRAME RAIL REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Transmission auxiliary oil cooler removed (TM 9-2320-
366-20-4).
M1093 Parachute suspension removed (para 13-4).
Tool box removed (TM 9-2320-366-20-4).
Hydraulic manifold removed (TM 9-2320-366-20-5).
Fuel tank removed (TM 9-2320-366-20-3).
Hydraulic reservoir removed, if equipped (TM 9-2320-
366-20-5).
Cab arctic kit removed, if equipped (para 18-2).
Swingfire removed, if equipped (TM 9-2320-366-20-5).
Arctic exhaust restrictor removed, if equipped (TM 9-
2320-366-20-5).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Tools and Special Tools (Cont)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix
B)
Wrench Set, Socket (Item 84, Appendix B)
Wrench, Impact, Electric (Item 88, Appendix B)
Socket Set, Impact (Item 58, Appendix B)
Materials/Parts
Nut, Self-locking (11) (Item 211, Appendix F)
Bolt (5) (Item 7, Appendix F)
Personnel
(3)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
•
Left and right side subframe rails are
removed the same way. Right side shown.
•
Steps (1) through (4) require the aid of an
assistant.
(1) Remove four self-locking nuts (1) and bolts (2) from front
lifting bracket (3). Discard self-locking nuts.
13-337
