TM 9-2320-366-34-2
13-6. REAR TENSION BEAM AND TAILLIGHT MOUNTING BRACKET REPLACEMENT
(CONT)
a. M1083 Removal.
NOTE
• Left and right side of rear tension beam is
removed the same way. Left side shown.
• Steps (1) through (3) require the aid of an
assistant.
(1) Remove pin (1) and shackle (2) from rear tension beam
(3).
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
(2) Remove two collars (4) and bolts (5) from rear tension
beam (3). Discard collars and bolts.
(3) Remove five collars (6), bolts (7), and taillight mounting
bracket (8) from rear tension beam (3). Discard collars
and bolts.
(4) Perform steps (1) through (3) on right side of rear
tension beam.
(5) Remove rear tension beam (3) from vehicle.
13-20
