TM 9-2320-366-34-2
(10) Position bracket (16) on cylinder bracket (1) with four
screws (17), spacer (18), and four self-locking nuts (19).
(11) Tighten four self-locking nuts (19) to 27-33 lb-ft (37-45
N·m).
(12) Position two screws (20), washers (21), and self-locking
nuts (22) in center catwalk bracket (23).
(13) Tighten two self-locking nuts (22) to 27-33 lb-ft (37-45
N·m).
(14) Position hydraulic tube bracket (24) on cylinder bracket
(1) with two screws (25), four washers (26), and two self-
locking nuts (27).
(15) Tighten two self-locking nuts (27) to 27-33 lb-ft (37-45
N·m).
WARNING
Use care when moving oxygen/acetylene
bottles. Oxygen/acetylene bottles can act as
projectiles if punctured and discharge
explosive gases.
Failure to comply may
result in serious injury or death to personnel
or damage to equipment.
NOTE
Steps (16) through (19) require the aid of two
assistants.
(16) Position oxygen bottle (28) on cylinder bracket (1).
(17) Install two straps (29) in cylinder bracket (1) with two
washers (30) and self-locking nuts (31).
13-17
