TM 9-2320-366-34-2
13-5. M1089 CRANE BOOM REST AND CYLINDER BRACKET REPLACEMENT/REPAIR
(CONT)
(4) Remove pin (7) and boom rest bracket (8) from cylinder
bracket (6).
(5) Remove four self-locking nuts (9), washers (10), and
straps (11) from cylinder bracket (6).
Discard self-
locking nuts.
(6) Remove eight self-locking nuts (12), washers (13),
screws (14), and four pads (15) from cylinder bracket (6).
Discard self-locking nuts.
c. Assembly
(1) Position four pads (1) on cylinder bracket (2) with eight
screws (3), washers (4), and self-locking nuts (5).
(2) Tighten eight self-locking nuts (5) to 84-108 lb-in. (9-12
N·m).
(3) Install four straps (6) in cylinder bracket (2) with four
washers (7) and self-locking nuts (8).
13-14
