TM 9-2320-366-34-2
b. Cleaning/Inspection.
WARNING
Dry Cleaning Solvent (PD-680) is TOXIC and flammable. Wear protective goggles and gloves;
use only in well ventilated area; avoid contact with skin, eyes, and clothes, and do not
breathe vapors. Keep away from heat or flame. Never smoke when using solvent; the
flashpoint for Type I Dry Cleaning Solvent is 100°F (38°C) and for Type II is 130°F (50°C).
Failure to comply may result in serious injury or death to personnel.
If personnel become dizzy while using cleaning solvent, immediately get fresh air and
medical help. If dry cleaning solvent contacts skin or clothes, flush with cold water. If dry
cleaning solvent contacts eyes, immediately flush eyes with water and get immediate medical
attention. Failure to comply may result in injury to personnel.
(1) Clean all metal parts with dry cleaning solvent.
NOTE
Replace any part that fails visual inspection.
(2) Inspect all metal parts for pitting, corrosion, or signs of
wear.
c. Assembly.
NOTE
Apply lubricating oil to all parts during
assembly.
(1) Install preformed packing (1) on shaft (2).
Change 1
10-23
