TM 9-2320-366-34-2
10-3. REAR AXLE BOGIE REPAIR (CONT)
(7) Remove three screws (10) and mounting plate (11) from
housing (7).
(8) Remove housing (7) and bearing cone (12) from shaft
(13).
(9) Remove two bearing races (14) from housing (7).
(10) Remove bolt (15) from housing (7).
(11) Remove ring spacer(s) (16) and sleeve spacer (17) from
shaft (13).
(12) Remove bearing cone (18) from shaft (13).
NOTE
Note position of seals prior to disassembly.
(13) Remove seal (19) from sleeve spacer (20). Discard
seal.
(14) Remove sleeve spacer (20) and preformed packing (21)
from shaft (13). Discard preformed packing.
(15) Remove seal (22) from sleeve spacer (20). Discard
seal.
10-22.2
Change 1