TM 9-2320-366-34-2
8-2. TRANSFER CASE CONTROL VALVE ASSEMBLY REPLACEMENT/REPAIR (CONT)
b. Disassembly.
(1) Remove filter element (1) from control valve body (2).
Discard filter element.
WARNING
Use care when removing springs. Springs
are under tension and can act as projectiles
when released. Failure to comply may result
in injury to personnel.
NOTE
Retaining pin is punched out from top.
(2) Remove retaining pin (3) from control valve body (2).
(3) Remove stop (4), spring (5), and valve (6) from control
valve body (2).
(4) Remove retaining pin (7) from control valve body (2).
(5) Remove solenoid (8) from control valve body (2).
(6) Remove preformed packings (9 and 10) from solenoid
(8). Discard preformed packings.
(7) Remove valve (11) and spring (12) from control valve
body (2).
8-4
