TM 9-2320-366-34-2
Section II. MAINTENANCE PROCEDURE
8-2. TRANSFER CASE CONTROL VALVE ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d. Assembly
e. Installation
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (TM 9-2320-366-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Wrench, Torque, 0-150 lb-in (Item 91, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Gloves, Rubber (Item 26, Appendix B)
Multimeter, Digital (Item 41, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
Materials/Parts
Gasket (Item 68, Appendix F)
Gasket (Item 71, Appendix F)
Filter Element (Item 32, Appendix F)
Packing Preformed (Item 298, Appendix F)
Packing Preformed (Item 300, Appendix F)
Rag, Wiping (Item 60, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 30, Appendix C)
Solvent, Dry Cleaning (Item 83, Appendix C)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. Removal.
(1) Remove 10 bolts (1), valve body cover (2), and gasket
(3) from transfer case module (4). Discard gasket.
8-2
Change 1
