TM 9-2320-366-34-2
7-18. TRANSMISSION ASSEMBLY REPLACEMENT (UNUSUAL CONDITIONS) (CONT)
NOTE
Perform steps (78) and (79) on M1088.
(78) Position metal floor plate (82) in platform (83) with two
screws (84) and self-locking nuts (85).
(79) Tighten two self-locking nuts (85) to 22-28 lb-ft (30-38
N·m).
c. Follow-On Maintenance.
(1) Install M1089 hydraulic tank, if equipped (TM 9-2320-
366-20-5).
(2) Install M1090/M1094 dump body, if equipped (para 15-
10).
(3) Install cargo bed, if equipped (para 15-9).
(4) Install stationary work lights (TM 9-2320-366-20-3).
(5) Install hydraulic pump, if equipped (TM 9-2320-366-20-
5).
(6) Install PTO, if equipped (para 16-93).
(7) Install intermediate drive shaft (TM 9-2320-366-20-4).
(8) Install front drive shaft (TM 9-2320-366-20-4).
(9) Service transmission (TM 9-2320-366-20-3).
(10) Service transfer case (TM 9-2320-366-20-3).
(11) Connect batteries (TM 9-2320-366-20-3).
(12) Install spare tire (TM 9-2320-366-10-2).
(13) Operate vehicle and check transmission for oil leaks.
(14) Check exhaust pipe for exhaust leaks, excessive
noise, and vibration.
End of Task.
7-134
Change 1
