TM 9-2320-366-34-2
(4) Remove two bolts (5) from exhaust bracket (6).
(5) Remove self-locking nut (7) from clamp (8). Discard
self-locking nut.
(6) Remove exhaust pipe (4) from rear of turbocharger
(9).
(7) Remove clamp (8) from exhaust pipe (4).
NOTE
Hydraulic jack is used to support engine
and transmission while RH engine mount
and transmission bracket is being replaced.
(8) Position hydraulic jack with 8 in. (20 cm) wooden block
under transmission control valve module (9).
(9) Raise hydraulic jack to apply pressure to transmission
(10).
Change 1
7-105
