TM 9-2320-366-34-2
b. LH Installation.
(1) Position LH engine and transmission mount bracket (1)
on transmission (2) and engine (3) with four bolts (4).
(2) Position two bolts (5) in top of LH engine and
transmission mount bracket (1).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
Failure to comply may result in injury to
personnel.
(3) Apply light coat of sealing compound to threads of four
bolts (6).
(4) Position four bolts (6) on front of LH engine and
transmission mount bracket (1).
(5) Tighten four bolts (6) to 330-378 lb-ft (447-513 N·m).
(6) Tighten two bolts (5) to 76-94 lb-ft (103-127 N·m).
(7) Tighten four bolts (4) to 129-159 lb-ft (175-215 N·m).
Change 1
7-103
