TM 9-2320-366-34-2
(8) Position boot (19) on link spool (20) to allow access to
plunger (21).
CAUTION
Use care not to damage link spool during
removal. Failure to comply may result in
damage to equipment.
(9) Wrap three layers of abrasive cloth around plunger (21).
(10) Hold plunger (21) in a fixed position.
(11) Remove link spool (20) from plunger (21).
(12) Remove boot (19) from link spool (20). Discard boot.
(13) Match mark shift housing (18) to field ring (22).
(14) Remove five screws (23), lockwashers (24), and shift
housing (18) from field ring (22). Discard lockwashers.
(15) Remove preformed packing (25) from shift housing (18).
Discard preformed packing.
(16) Remove washer (27) and armature (28) from field ring
(22).
(17) Match mark shift housing (18) to nose housing (26).
(18) Remove washer (27) from nose housing (26).
(19) Remove five screws (29) and nose housing (26) from
shift housing (18).
Change 1
6-35
