TM 9-2320-366-34-2
(17) Match mark front housing (9) to stator (17).
(18) Remove nine self-locking nuts (34) from front
housing (9). Discard self-locking nuts.
(19) Remove front housing (9) from stator (17).
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure to
comply may result in injury to personnel.
(20) Remove retaining ring (35) from shaft (3).
(21) Remove retaining ring (36) from front housing (9).
(22) Remove shaft (3) from front housing (9).
(23) Remove retaining ring (37) from front housing (9).
(24) Remove bearing (38) from front housing (9).
(25) Remove bushing (39) from front housing (9).
6-5
