TM 9-2320-366-34-2
D-20. SPANNER WRENCH TOOL
Make the spanner wrench tool from 0.38 in. (1 cm) steel stock and hardware according to the following instructions.
Refer to the parts list and figure for details.
Item
Part
Name/Number
Material
Description
Size
Qty
1
Spanner Handle
Steel, 3/8 flat plate
6.64 in. (168.6 mm) x 11.98 in. (304.3 mm) x 0.38
in. (9.6 mm)
1
2
Spanner Jaw
Steel, 3/8 flat plate
3.05 in. (77.5 mm) x 9.08 in. (230.6 mm) x 0.38 in.
(9.6 mm)
1
3
Spanner Pin
Steel, Rod
0.25 in. OD (6.35 mm) x 0.75 in. (19.0 mm) long
2
4
Handle
Steel, pipe
1.25 in. OD (31.75 mm) x 1.00 in. ID (25.4 mm) x
21.00 in. (533.4 mm) long
1
5
Nut
Nut, 3/8 Hex
2
6
Bolt
Bolt, 3/8 X 1.25
0.38 in. (9.6 mm) OD x 1.25 in. (31.75 mm) long
1
Figure D-29. Spanner Wrench Tool Assembly
a. Weld pins (3) in spanner handle (1) and spanner jaw (2) as shown in Figure D-29. Spanner Wrench Tool
Assembly.
b. Position and clamp handle (4) to spanner handle piece (1) as shown in Figure D-29. Spanner Wrench Tool
Assembly.
c. Weld handle to spanner handle on both sides of spanner handle.
d. Assemble spanner jaw (2) and spanner handle using bolt (6) and 2 hex nuts (5).
D-35
