TM 9-2320-366-34-2
14-8. INTERMEDIATE AXLE SHOCK ABSORBER BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Wrench, Impact, Electric (Item 88, Appendix B)
Tools and Special Tools (Cont)
Socket Set, Impact (Item 58, Appendix B)
Materials/Parts
Bolt (2) (Item 6, Appendix F)
Nut, Self-locking (3) (Item 229, Appendix F)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
• Left and right side intermediate axle shock
absorber brackets are removed the same way.
Right side shown.
• Front and rear intermediate axle shock absorber
brackets are removed the same way. Rear one
shown.
• Perform step (1) on vehicle serial numbers 0001
through 1398 and 2988 and higher serial
numbers.
(1) Remove self-locking nut (1), bolt (2), and washer (3)
from intermediate axle shock absorber (4). Discard self-
locking nut.
14-38
