TM 9-2320-366-34-2
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
(16) Remove collar (29) and bolt (30) from angle bracket
(31). Discard collar and bolt.
(17) Remove two bolts (32), angle bracket (31) and front
spring rear bracket (19) from frame rail (33).
d. Front Spring Rear Bracket Installation.
(1) Position angle bracket (1) on frame rail (2) with bolt (3)
and self-locking nut (4).
WARNING
Adhesive
Sealant
MIL-S-46163
can
damage your eyes. Wear safety goggles
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention. Failure to comply may result in
injury to personnel.
(2) Apply sealing compound to threads of two bolts (5).
(3) Position front spring rear bracket (6) on angle bracket (1)
with two bolts (5).
(4) Tighten two bolts (5) to 195-240 lb-ft (265-325 N·m).
(5) Tighten self-locking nut (4) to 210-225 lb-ft (285-305
N·m).
14-31
