TM 9-2320-366-34-2
14-6. FRONT SPRING BRACKETS REPLACEMENT (CONT)
(6) Install cab tilt cylinder (8) on cab tilt cylinder bracket (5)
with washer (9) and cotter pin (10).
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes. Wear safety goggles when
using; avoid contact with eyes. If sealant
contacts eyes, flush eyes with water and
get immediate medical attention. Failure
to comply may result in injury to
personnel.
NOTE
Steps (7) through (13) apply to left side front
spring front bracket.
(7) Apply sealing compound to threads of two bolts (11).
(8) Position left front spring front bracket (12) on left frame
rail (13) with two bolts (11).
(9) Tighten two bolts (11) to 195-240 lb-ft (265-325 N·m).
14-26
