TM 9-2320-366-34-2
13-45. RADIATOR BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Cab front support removed (para 15-3).
Steering gear removed (para 12-2).
Radiator/charger air cooler removed (TM 9-2320-
366-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench, Impact, Electric (Item 88, Appendix B)
Tools and Special Tools (Cont)
Socket Set, Impact (Item 58, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Materials/Parts
Bolt (2) (Item 7, Appendix F)
Bolt (Item 16, Appendix F)
Nut, Self-locking (3) (Item 211, Appendix F)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
NOTE
•
Left and right side radiator brackets are
removed the same way. Left side shown.
•
Steps (1) and (2) require the aid of an
assistant.
(1) Remove collar (1) and bolt (2) from radiator bracket (3).
Discard collar and bolt.
(2) Remove two collars (4), bolts (5), and radiator bracket
(3) from frame rail (6). Discard collars and bolts.
(3) Remove two bolts (7) from radiator bracket (3).
13-392
