TM 9-2320-366-34-2
b. Installation.
NOTE
Front and rear frame muffler support brackets
are installed the same way. Front frame
muffler support bracket shown.
(1) Position frame muffler support bracket (1) on frame rail
(2) with two screws (3) and self-locking nuts (4).
(2) Tighten two self-locking nuts (4) to 62-76 lb-ft (84-103
N·m).
(3) Position clamp (5) on frame muffler support bracket (1)
with screw (6) and self-locking nut (7).
(4) Tighten self-locking nut (7) to 88-106 lb-in. (10-12 N·m).
c. Follow-On Maintenance.
(1) Install M1093/M1094 angle bracket (RH side) (para 13-
10).
(2) Install 15K Self-Recovery Winch (SRW), if equipped
(para 16-88).
(3) Install heatshield and muffler (TM 9-2320-366-20-3).
End of Task.
13-391
