TM 9-2320-366-34-2
13-43. INTERMEDIATE CROSSMEMBER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
One frame rail removed (para 13-24 through 13-32).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench, Impact, Electric (Item 88, Appendix B)
Socket Set, Impact (Item 58, Appendix B)
Tools and Special Tools (Cont)
Wrench Set, Socket (Item 84, Appendix B)
Sling, Cargo (2) (Item 56, Appendix B)
Materials/Parts
Bolt (4) (Item 17, Appendix F)
Nut, Self-locking (4) (Item 211, Appendix F)
Personnel Required
(2)
a. Removal.
WARNING
Intermediate crossmember weighs app-
roximately 75 lbs (34 kgs). Attach a suitable
lifting device prior to removal. Failure to
comply may result in injury to personnel or
damage to equipment.
CAUTION
When removing bolts, continuous removal of
collars is mandatory.
Failure to comply will
result in seizing of collar to bolt.
NOTE
• Step (1) requires the aid of an assistant.
• All models have two intermediate crossmembers
except models M1085 and M1086. M1085 and
M1086 have three intermediate crossmembers.
Remove four collars (1), bolts (2), and intermediate
crossmember (3) from frame rail (4). Discard collars and
bolts.
13-388
