TM 9-2320-366-34-3
17-4. M1090/M1094 DUMP BODY HOIST CYLINDER REPLACEMENT (CONT)
(10) Remove retaining ring (9) from pin (10).
(11) Remove pin (10) from hoist cylinder (4).
(12) Remove hoist cylinder (4) from vehicle.
(13) Remove two 90-degree fittings (11) and spacers (12)
from hoist cylinder (4).
b. Installation.
(1) Install two spacers (1) and 90-degree fittings (2) on hoist
cylinder (3).
17-28