TM 9-2320-366-34-3
(15) Remove solenoid assembly (21) from upper control valve
assembly (2).
(16) Remove seal (22), preformed packing (23), retaining
plate (24), and spacer (25) from actuator assembly (21).
Discard seal and preformed packing.
(17) Remove two screws (26), retaining plates (27),
preformed packing (28), and seal (29) from upper control
valve assembly (2). Discard preformed packing and
seal.
(18) Remove piston assembly (30) from stripper bolt (31).
(19) Remove spacer (32) and flange (20) from piston
assembly (30).
(20) Remove inner seal (33) from flange (20). Discard seal.
(21) Position piston rod (34) in vise.
(22) Remove cap screw (35) and piston (18) from piston rod
(34).
Change 1
16-502.5
