TM 9-2320-366-34-3
NOTE
Both shuttle blocks are disassembled the
same way. One shuttle block shown.
(49) Remove two screws (68), shuttle block (69) and three
preformed packings (70) from valve manifold (25).
Discard preformed packings.
(50) Remove plug (71) and shuttle block valve (72) from
shuttle block (69).
(51) Remove preformed packing (73) from plug (71). Discard
preformed packing.
(52) Remove backup ring (74) and two preformed packings
(75) from shuttle block valve (72). Discard backup ring
and preformed packings.
(53) Perform steps (49) through (52) on remaining shuttle
block.
(54) Remove fitting (76) from valve manifold (25).
(55) Remove preformed packing (77) from fitting (76).
Discard preformed packing.
16-319