TM 9-2320-366-34-3
d. Assembly.
NOTE
Apply lubricating oil to all parts during
assembly.
(1) Install two races (1) and bearing (2) in hub (3).
(2) Install bearing (4) on shaft (5).
(3) Install shaft (5) in hub (3).
(4) Install seal (6) in hub (3).
(5) Install bearing (7) on shaft (5).
(6) Position lockwasher (8) and nut (9) on shaft (5).
(7) Tighten nut (9) until shaft (5) starts to turn.
(8) Tighten nut (9) until one tang on lockwasher (8) aligns
with slot in nut (9).
(9) Bend tang of lockwasher (8) up in slot of nut (9).
16-287