TM 9-2320-366-34-2
13-9. M1084/M1085/M1086/M1088 REAR BUMPER REPLACEMENT (CONT)
NOTE
Perform steps (5) through (7) on RH side.
(5) Remove five collars (13), and bolts (14) from rear
bumper (3). Discard collars and bolts.
(6) Remove self-locking nut (15), tie-down ring (16), and
bracket (17) from rear bumper (3). Discard self-locking
nut.
(7) Remove collar (18), bolt (19), and spacer plate (20) from
rear bumper (3). Discard collar and bolt.
(8) Remove two collars (21), bolts (22), and rear bumper (3)
from vehicle. Discard collars and bolts.
(9) Remove four screws (23) and two reflectors (24) from
rear bumper (3).
f. M1088 Installation.
(1) Install two reflectors (1) on rear bumper (2) with four
screws (3).
NOTE
Steps (2) through (14) require the aid of an
assistant.
(2) Position rear bumper (2) on vehicle with two bolts (4)
and self-locking nuts (5).
(3) Tighten two self-locking nuts (5) to 210-225 lb-ft (285-
305 N·m).
13-64