TM 9-2320-366-34-2
13-9. M1084/M1085/M1086/M1088 REAR BUMPER REPLACEMENT (CONT)
d. M1085 Installation.
NOTE
Steps (1) through (5) require the aid of an
assistant.
(1) Position rear bumper (1) on vehicle with two bolts (2)
and self-locking nuts (3).
(2) Tighten two self-locking nuts (3) to 210-225 lb-ft (285-
305 N·m).
NOTE
Left and right side of rear bumper is installed
the same way. Left side shown.
(3) Position three bolts (4) and self-locking nuts (5) in rear
bumper (1).
(4) Position three bolts (6) and self-locking nuts (7) in rear
bumper (1).
(5) Tighten three self-locking nuts (5 and 7) to 210-225 lb-ft
(285-305 N·m).
(6) Perform steps (3) through (5) on right side of rear
bumper.
13-62