13-10. M1093/M1094 ANGLE BRACKET REPLACEMENT (CONT)
b. LH Installation.
Steps (1) and (2) require the aid of an
(1) Position angle bracket (1) on frame rail (2) with six bolts
(3) and self-locking nuts (4).
(2) Tighten six self-locking nuts (4) to 210-225 lb-ft (285-305
c. RH Removal.
When removing bolts, continuous removal of
collars is mandatory. Failure to comply may
result in seizing of collar to bolt.
Steps (1) requires the aid of an assistant.
Remove four collars (1), bolts (2), and angle bracket (3)
from frame rail (4). Discard collars and bolts.