TM 9-2320-366-34-2
13-7. REAR CROSSMEMBER REPLACEMENT (CONT)
(6) Remove five collars (11) and bolts (12) from rear
crossmember (5). Discard collars and bolts.
(7) Perform steps (5) and (6) on right side of rear
crossmember.
(8) Remove two collars (13), bolts (14), and rear
crossmember (5) from vehicle. Discard collars and bolts.
h. M1090/M1094 Installation.
NOTE
Steps (1) through (6) require the aid of an
assistant.
(1) Position rear crossmember (1) on vehicle with two bolts
(2) and self-locking nuts (3).
(2) Tighten two self-locking nuts (3) to 210-225 lb-ft (285-
305 N·m).
13-44