TM 9-2320-366-34-2
13-7. REAR CROSSMEMBER REPLACEMENT (CONT)
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
(9) Remove three collars (20) and bolts (21) from rear
crossmember (5). Discard collars and bolts.
(10) Remove two self-locking nuts (22) and bolts (23) from
rear crossmember (5). Discard self-locking nuts.
(11) Perform steps (5) through (10) on right side of rear
crossmember.
(12) Remove two collars (24), bolts (25) and rear
crossmember (5) from vehicle. Discard collars and bolts.
f. M1083/M1093 Installation.
NOTE
Steps (1) through (6) require the aid of an
assistant.
(1) Position rear crossmember (1) on vehicle with two bolts
(2) and self-locking nuts (3).
(2) Tighten two self-locking nuts (3) to 210-225 lb-ft (285-
305 N·m).
13-40