TM 9-2320-366-34-2
b. Disassembly.
(1) Remove self-locking
nut
(1),
washer
(2),
and
intermediate front drive yoke (3) from intermediate front
drive shaft (4). Discard self-locking nut.
(2) Remove coupler bearing (5) from intermediate front drive
shaft (4).
c. Assembly.
(1) Install coupler bearing (1) on intermediate front drive
shaft (2).
(2) Position intermediate front drive yoke (3) on intermediate
front drive shaft (2) with washer (4) and self-locking nut
(5).
(3) Tighten self-locking nut (5) to 450-600 lb-ft (610-814
N·m).
Change 1
8-13