TM 9-2320-366-34-2
7-17. ENGINE AND TRANSMISSION MOUNT BRACKET REPLACEMENT (CONT)
NOTE
Perform steps (8) and (9) on M1089.
(8) Position three hoses (7) on three stage hydraulic
manifold (8).
(9) Tighten three hoses (7) to 148-161 lb-ft (201-218
N·m).
(10) Remove hydraulic jack and wooden block from under
transmission control valve module (9).
c. RH Removal.
WARNING
Ensure exhaust system is cool before
performing maintenance. Failure to
comply may result in injury to
personnel.
(1) Remove self-locking nut (1) from clamp (2). Discard
self-locking nut.
(2) Remove exhaust pipe (3) from exhaust pipe (4).
(3) Remove clamp (2) from exhaust pipe (3).
7-104
Change 1