TM 9-2320-366-34-2
(4) Install bushing (6) in front housing (7).
(5) Install bearing (8) in front housing (7).
WARNING
Use care when installing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(6) Install retaining ring (9) in front housing (7).
(7) Install shaft (3) in front housing (7).
(8) Install retaining ring (10) in front housing (7).
(9) Install retaining ring (11) on shaft (3).
(10) Position front housing (7) on stator (12) with matchmarks
aligned.
(11) Position nine self-locking nuts (13) on stator (12).
(12) Tighten nine self-locking nuts (13) to 18 lb-in. (2 Nm).
6-7