TM 9-2320-366-34-2
(21) Install two washers (24) and field leads (25) on front
housing (7) with two nuts (26).
(22) Position fan guard (27) on end housing (19) with four
washers (28) and screws (29).
(23) Tighten four screws (29) to 65 lb-in. (7 Nm).
WARNING
Adhesive
Sealant
MIL-S-46163
can
damage your eyes. Wear safety goggles
when using; avoid contact with eyes. If
sealant contacts eyes, flush with water
and get immediate medical attention.
Failure to comply may result in injury to
personnel.
(24) Apply sealing compound to threads of two screws (30).
(25) Position voltage regulator (31) on stator (12) with two
lockwashers (32) and screws (30).
(26) Tighten two screws (30) to 65 lb-in. (7 Nm).
(27) Connect connector (33) to voltage regulator (31).
6-9