TM 9-2320-366-34-4
NOTE
Perform steps (82) and (83) on vehicle serial
numbers 0001 through 1398, and 2988 and
higher serial numbers.
(82) Position rear axle shock absorber (38) in rear axle shock
absorber front bracket (39) with washer (37), bolt (36),
and self-locking nut (35).
(83) Tighten self-locking nut (35) to 196-240 lb-ft (265-325
N·m).
NOTE
• Perform step (84) through (93) on right side of
vehicle.
• Use bolt P/N 12414307-138 on step (84).
(84) Position bolt (109) and self-locking nut (110) in RH frame
rail (30).
(85) Tighten self-locking nut (110) to 196-240 lb-ft (265-325
N·m).
NOTE
Use bolt P/N 12414307-141 on step (86).
(86) Position rear axle shock absorber front bracket (24) and
bracket (10) on RH frame rail (30) with bolt (111) and
self-locking nut (112).
(87) Position bolt (113), two washers (29) and self-locking nut
(114) on rear axle shock absorber front bracket (24).
(88) Tighten self-locking nuts (112 and 114) to 196-240 lb-ft
(265-325 N·m).
Change 1
18-17
