TM 9-2320-366-34-4
18-2. M1083 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT)
(18) Remove collar (40) and bolt (41) from rear axle shock
absorber front bracket (39). Discard collar and bolt.
(19) Remove collar (42), bolt (43), bracket (11), two washers
(44) and rear axle shock absorber front bracket (39) from
LH frame rail (45). Discard collar and bolt.
(20) Remove collar (46) and bolt (47) from LH frame rail (45).
Discard collar and bolt.
(21) Remove two collars (48) and bolts (49) from LH frame
rail (45). Discard collars and bolts.
NOTE
Left and right sides of rear stabilizer bar are
disconnected the same way.
Right side
shown.
(22) Remove self-locking nut (50), bolt (51), and bracket
assembly (52) from frame bracket (53). Discard self-
locking nut.
(23) Perform step (22) on left side of vehicle.
(24) Lower rear stabilizer bar (54).
(25) Remove two collars (55) and bolts (56) from rear
crossmember (16). Discard collars and bolts.
18-6
Change 1