TM 9-2320-366-34-4
26-4. M1089 SWING DRIVE HYDRAULIC MOTOR REPAIR (CONT)
(9) Reposition motor housing (2) in vise with output shaft (1)
down.
CAUTION
Mark bolt hole on motor housing that aligns
with timing mark on output shaft. Failure to
comply may result in damage to equipment.
(10) Align timing mark on output shaft (1) with any bolt hole
in motor housing (2).
(11) Install preformed packing (11) on motor housing (2).
(12) Install spur gear shaft (12) in output shaft (1).
(13) Fill motor housing (2) with lubricating oil.
(14) Install spacer plate (13) on motor housing (2).
(15) Install preformed packing (14) on geroler (15).
CAUTION
Position geroler with largest star point aligned
with bolt hole on motor housing and timing
mark on output shaft. Failure to comply may
result in damage to equipment.
(16) Install geroler (15) on spur gear shaft (12).
(17) Install preformed packing (16) on geroler (15).
26-24