TM 9-2320-366-34-4
25-3. M1089 STINGER CYLINDER REPAIR
This task covers:
a. Disassembly
b. Cleaning/Inspection
c. Assembly
INITIAL SETUP
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
Wrench, Torque, 0-200 lb-in. (Item 92, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench Set, Socket, (Item 84, Appendix B)
Socket Set, Socket Wrench (TM 9-2320-366-20)
Pan, Drain (Item 43, Appendix B)
Vise, Machinists (Item 82, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Gloves, Rubber (Item 26, Appendix B)
Caps, Vise Jaw (Item 12, Appendix B)
Tools and Special Tools
Spanner, Wrench Tool (Item 20, Appendix D)
Materials/Parts
Kit, Seal (Item 124, Appendix F)
Solvent, Dry Cleaning (Item 83, Appendix C)
Lubricating Oil, Engine (Item 46, Appendix C)
Rag, Wiping (Item 60, Appendix C)
a. Disassembly.
(1) Position stinger cylinder (1) in vise.
(2) Place drain pan under stinger cylinder (1).
(3) Extend cylinder rod (2) approximately 12 in. (31 cm).
(4) Loosen screw (3) in cylinder rod retainer (4).
(5) Unscrew cylinder rod retainer (4) from stinger cylinder
(1).
(6) Remove cylinder rod (2) and cylinder rod retainer (4)
from stinger cylinder (1).
(7) Remove stinger cylinder (1) from vise.
25-8
