TM 9-2320-366-34-4
(6) Remove rod (7) from cylinder barrel (1).
NOTE
Steps (7) and (8) require the aid of an
assistant.
(7) Remove cylinder barrel (1) from vise.
(8) Position rod (7) in vise.
(9) Remove seal assembly (8) from piston (9). Discard seal
assembly.
(10) Remove setscrew (10) and piston (9) from rod (7).
(11) Remove guide lock ring (11) from piston (9).
(12) Remove two back-up rings (12) and preformed packing
(13) from piston (9).
Discard back-up rings and
preformed packing.
25-3
