TM 9-2320-366-34-4
Section II. MAINTENANCE PROCEDURES
24-2. INTERMEDIATE DIFFERENTIAL REPAIR
This task covers:
a. Disassembly
b. Cleaning/Inspection
c. Assembly
d. Adjustment
INITIAL SETUP
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Stand, Differential Carrier Repair (TM 9-2320-366-20)
Puller Kit, Mechanical (Item 52, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Gloves, Rubber (Item 26, Appendix B)
Indicator Dial (Item 36, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Multiplier, Torque Wrench (Item 42, Appendix B)
Holding Bar, Pinion (TM 9-2320-366-20)
Wrench Set, Socket (Item 84, Appendix B)
Puller Kit, Universal (Item 50, Appendix B)
Caliper Set, Micrometer, Outside (Item 9,
Appendix B)
Press, Arbor, Hand Operated (Item 48, Appendix B)
Socket, Socket Wrench (TM 9-2320-366-20)
Socket Set, Impact (Item 58, Appendix B)
Wrench, Impact, Electric (Item 88, Appendix B)
Materials/Parts
Sealant Adhesive (Item 67, Appendix C)
Sealant Adhesive (Item 68, Appendix C)
Adhesive (Item 5, Appendix C)
Adhesive (Item 6, Appendix C)
Grease, Automotive and Artillery (Item 35,
Appendix C)
Lubrication Oil Gear (Item 51, Appendix C)
Rag, Wiping (Item 60, Appendix C)
Pin, Cotter (2) (Item 335, Appendix F)
Nut, Self-Locking (Item 194, Appendix F)
Parts Kit, Seal Replacement (Item 313.4,
Appendix F)
Parts Kit, Seal Replacement (Item 313.5,
Appendix F)
Nut, Self-Locking (Item 192, Appendix F)
Nut, Self-Locking (Item 193, Appendix F)
Packing, Preformed (Item 256.2, Appendix F)
Solvent, Dry Cleaning (Item 83, Appendix C)
Sealant Adhesive (Item 66, Appendix C)
Packing, Preformed (Item 256.1, Appendix F)
Personnel Required
(2)
a. Disassembly
WARNING
Intermediate
differential
weighs
approximately 350 lbs (159 kgs). Attach a
suitable lifting device prior to moving.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
Step (1) requires the aid of an assistant.
(1) Install differential carrier (1) on differential carrier repair
stand.
24-2
Change 1
