TM 9-2320-366-34-3
17-4. M1090/M1094 DUMP BODY HOIST CYLINDER REPLACEMENT (CONT)
(7) Connect hydraulic hose (9) to hoist cylinder (3).
(8) Raise hoist cylinder (3) until holes in subframe assembly
(10) are above frame (11).
(9) Remove wrecking bar from holes in subframe assembly
(10).
(10) Lower hoist cylinder (3).
(11) Connect hydraulic hoses (6 and 9) to hydraulic control
valve (12).
c. Follow-On Maintenance.
(1) Connect batteries (TM 9-2320-366-20-3).
(2) Fill hydraulic reservoir (TM 9-2320-366-10).
(3) Start engine (TM 9-2320-366-10-1).
(4) Engage PTO (TM 9-2320-366-10-1).
(5) Increase engine RPM’s to 1250-1450 rpm’s (TM 9-2320-
366-10-1).
17-30
