TM 9-2320-366-34-3
NOTE
Route test hose between frame and exit
under vehicle.
(5) Install adapter (5) and test hose (6) on swivel run tee (4).
(6) Connect hose B (2) to swivel run tee (4).
(7) Install 10,000 PSI transducer on test hose (6).
(8) Connect 10,000 PSI transducer to STE/ICE-R.
(9) Start engine (TM 9-2320-366-10-1).
(10) Position PTO switch to on (TM 9-2320-366-10-1).
(11) Increase engine speed to 1250-1450 RPM (TM 9-2320-
366-10-1).
(12) Attach temperature indicator label to hydraulic reservoir
(7).
Change 1
17-19
