TM 9-2320-366-34-3
17-2. SUSPENSION CYLINDER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Cab raised (TM 9-2320-366-10-1).
Top radiator fan shroud removed (TM 9-2320-366-20-
3). (LH side only).
Engine front resilient mounts removed (para (3-4). (LH
side only).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Gloves, Rubber (Item 26, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B)
Tools and Special Tools (Cont)
Wrench Set, Socket (Item 84, Appendix B)
Socket Set, Socket Wrench (Item 59, Appendix
B)
Materials/Parts
Cap and Plug Set (Item 17, Appendix D)
Hydraulic Fluid A (Item 40.3, Appendix C)
Packing, Preformed (2) (Item 235, Appendix F)
Nut, Self-Locking (Item 191, Appendix F)
Pin, Cotter (Item 325.1, Appendix F)
Personnel Required
(2)
a. Removal.
NOTE
Left and right suspension cylinders are
removed the same way. Right side shown.
(1) Remove two quick release pins (1) from suspension
cylinder (2).
(2) Remove screw (3) and two lanyards (4) from suspension
cylinder (2).
17-2
Change 1
