TM 9-2320-366-34-3
16-94. M1089 WRECKER CONTROL PANEL REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
WRECKER CONTROL PANEL power cable assembly
removed (TM 9-2320-366-20-4).
WRECKER CONTROL PANEL hoses and tubing
removed (TM 9-2320-366-20-5).
Upper main valve assembly removed (para 16-83).
Lower valve assembly removed (para 16-84).
Linear directional control valve removed (para 16-83).
Underplate, splash guard, and brackets removed (TM
9-2320-366-20-4).
Eight-bank valve assembly removed (para 16-59).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Tools and Special Tools (Cont)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix
B)
Wrench Set, Socket (Item 85, Appendix B)
Sling, Cargo (Item 56, Appendix B)
Materials/Parts
Nut, Self-Locking (2) (Item 199, Appendix F)
Nut, Self-Locking (3) (Item 199.2, Appendix F)
Nut, Self-Locking (2) (Item 199.1, Appendix F)
Personnel Required
(2)
a. Removal.
(1) Remove two nuts (1) and adapters (2) from WRECKER
CONTROL PANEL (3).
(2) Remove two self-locking nuts (4), washers (5), screws
(6), and handle (7) from WRECKER CONTROL PANEL
(3). Discard self-locking nuts.
16-586
Change 1
