TM 9-2320-366-34-3
16-92. M1089 THREE STAGE HYDRAULIC PUMP REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (TM 9-2320-366-20-3).
Hydraulic tank removed (TM 9-2320-366-20-5).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench Set, Crowfoot, Ratcheting (TM 9-2320-366-20)
Wrench Set, Socket (Item 84, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Materials/Parts
Cap and Plug Set (Item 17, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 30, Appendix C)
Packing, Preformed (3) (Item 230, Appendix F)
Packing, Preformed (3) (Item 233, Appendix F)
Lubricating Oil, Engine (item 35, Appendix C)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
CAUTION
Cap or plug hydraulic connections to prevent
contamination of hydraulic system. Failure to
comply may result in damage to equipment.
NOTE
Tag hydraulic hoses and connection points
prior to disconnecting.
(1) Disconnect two hoses (1) from tubes (2).
(2) Disconnect hose (3) from adapter (4).
16-565
