TM 9-2320-366-34-3
16-90. 15K SELF-RECOVERY WINCH (SRW) HYDRAULIC MOTOR REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
15K Self-Recovery Winch (SRW) counterbalance/
cartridge valve removed (para 16-89).
Tools and Special Tools
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Tools and Special Tools (Cont)
Tool Kit, Genl Mech (Item 78, Appendix B)
Materials/Parts
Gasket (Item 54, Appendix F)
Lockwasher (2) (Item 158, Appendix F)
a. Removal.
(1) Remove two screws (1), lockwashers (2), washers (3),
and hydraulic motor (4) from 15K SRW (5). Discard
lockwashers.
(2) Remove gasket (6) from hydraulic motor (4). Discard
gasket.
b. Installation.
(1) Install gasket (1) on hydraulic motor (2).
(2) Position hydraulic motor (2) on 15K SRW (3) with two
washers (4), lockwashers (5), and screws (6).
(3) Tighten two screws (6) to 70-95 lb-ft (95-129 N·m).
c. Follow-On Maintenance.
(1) Install counterbalance valve (para 16-89).
(2) Operate 15K Self-Recovery Winch (SRW) and check for
hydraulic leaks (TM 9-2320-366-10-2).
End of Task.
16-561
