TM 9-2320-366-34-3
(35) Install two preformed packings (51) and back-up rings
(52) on brake piston (53).
(36) Alternately install ten friction disc plates (54) and nine
brake drive plates (55) in outer brake housing (56).
(37) Install brake piston (53) in outer brake housing (56).
(38) Install brake shaft (57) in outer brake housing (56).
(39) Install two dowel pins (58) in motor end support (34).
(40) Install preformed packing (59) on motor end support
(34).
(41) Position outer brake housing (56) in motor end support
(34) with six lockwashers (60) and screws (61).
(42) Tighten six screws (61) to 45-55 lb-ft (61-75 N·m).
e. Installation.
WARNING
15K Self-Recovery Winch (SRW) weighs
approximately 300 lbs (136 kgs). Attach a
suitable lifting device prior to installation.
Failure to comply may result in injury to
personnel or damage to equipment.
(1) Position 15K SRW (1) on vehicle with eight self-locking
nuts (2), bolts (3), and mounting plates (4 and 5).
(2) Tighten eight self-locking nuts (2) to 150-180 lb-ft (203-
244 N·m).
16-555
