TM 9-2320-366-34-3
16-88. 15K SELF-RECOVERY WINCH (SRW) ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d. Assembly
e. Installation
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
15K Self-recovery winch (SRW) cable removed (TM 9-
2320-366-20-5).
Muffler and heat shields removed (TM 9-2320-366-20-
3).
Cartridge/Counterbalance valve removed (para 16-
89).
Hydraulic motor removed (para 16-90).
Cargo bed removed, except M1088 and M1089 (para
15-9).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Pan, Drain (Item 43, Appendix B)
Wrench, Torque, 0-250 N·m (Item 94, Appendix B)
Gloves, Rubber (Item 26, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Sling, Cargo (2) (Item 56, Appendix B)
Materials/Parts
Rag, Wiping (Item 60, Appendix C)
Lubricating Oil, Engine (Item 46, Appendix C)
Solvent, Dry Cleaning (Item 83, Appendix C)
Lockwasher (6) (Item 155, Appendix F)
Lockwasher (6) (Item 158, Appendix F)
Lockwasher (6) (Item 156, Appendix F)
Parts Kit, Seal (Item 314, Appendix F)
Parts Kit, Disc and Spring (Item 311, Appendix
F)
Spring, Compression (Item 426, Appendix F)
Parts Kit, Winch (Item 321, Appendix F)
Nut, Self-Locking (8) (Item 211, Appendix F)
Personnel Required
(2)
a. Removal.
WARNING
15K Self-Recovery Winch (SRW) weighs
approximately 300 lbs (136 kgs). Attach a
suitable lifting device prior to removal.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
Step (1) requires the aid of an assistant.
(1) Remove eight self-locking nuts (1), bolts (2), mounting
plates (3 and 4), and 15K SRW (5) from vehicle.
Discard self-locking nuts.
16-540
