TM 9-2320-366-34-3
16-85. M1089 MONOBLOCK VALVE REPLACEMENT/ADJUSTMENT
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Adjustment
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Hydraulic tank supply valve and return valve closed
(TM 9-2320-366-10-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Pan, Drain (Item 43, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Wrench Set, Crowfoot, Ratcheting (TM 9-2320-366-20)
Keyset, Socket Head Screw (Item 38, Appendix B)
STE/ICE-R (Item 70, Appendix B)
Materials/Parts
Cap and Plug Set (Item 17, Appendix C)
Sealing Compound (Item 76, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape (Item
30, Appendix C)
Materials/Parts (Cont)
Nut, Self-Locking (4) (Item 176, Appendix F)
Lockwasher (4) (Item 135, Appendix F)
Packing, Preformed (4) (Item 237, Appendix F)
Packing, Preformed (3) (Item 230, Appendix F)
Packing, Preformed (2) (Item 236, Appendix F)
Kit, Seal (Item 112, Appendix F)
Kit, Seal (Item 114, Appendix F)
Kit, Seal (2) (Item 111, Appendix F)
Kit, Seal (Item 115, Appendix F)
Kit, Seal (2) (Item 110, Appendix F)
Kit, Seal (2) (Item 109, Appendix F)
References
TM 9-4910-571-12&P
Personnel Required
(3)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. Removal.
(1) Remove four self-locking nuts (1), washers (2), screws
(3), catwalk (4), and four isolators (5) from vehicle.
Discard self-locking nuts.
16-521
