TM 9-2320-366-34-3
16-72. M1089 TELESCOPIC LIFT CYLINDER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Underlift assembly unfolded and in down position
(TM 9-2320-366-10-2).
Engine shut down (TM 9-2320-366-10-1).
Hydraulic reservoir supply and return valve closed
(TM 9-2320-366-10-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Tools and Special Tools (Cont)
Sling, Cargo (Item 56, Appendix B)
Materials/Parts
Cap and Plug Set (Item 17, Appendix C)
Lockwasher (Item 130, Appendix F)
Dispenser, Pressure Sensitive Adhesive Tape (Item
30, Appendix C)
Packing, Preformed (Item 237, Appendix F)
Personnel Required
(2)
a. Removal.
WARNING
Telescopic
lift
cylinder
weighs
approximately 225 lbs (102 kgs). Attach a
suitable lifting device prior to removal.
Failure to comply may result in injury to
personnel or damage to equipment.
CAUTION
Cap or plug hydraulic hoses and fittings to
prevent contamination of hydraulic system.
Failure to comply may result in damage to
equipment.
NOTE
· Tag hydraulic hoses and connection points
prior to disconnecting.
· Left and right side telescopic lift cylinders are
removed the same way. Left side shown.
(1) Disconnect hydraulic hose (1) from 90-degree fitting (2).
16-434
